TOC Index Search

 

Installing the Upgrade Software on the Old System

To install the upgrade software on the older Release 5 system:

  1. If you are using an A/B switch with a single monitor, switch to the old system.
  2. Insert the latest Intuity AUDIX R5 software CD-ROM in the Avaya Intuity system CD-ROM drive.
  3. Start at the Avaya Intuity Main Menu and select:

    4. Software Management
    	Software Installation
    		CD

    The system displays the following message: 

    ***SOFTWARE INSTALL***

    A successful backup has not been completed in the past 2 hours. In the unlikely event of a catastrophic failure during this upgrade procedure, a full system backup may be the only method of recovering the customer's data. Doing a full system backup is HIGHLY recommended.

    Do you want to continue with the upgrade anyway?
    (*) Yes, continue this operation without full system backup
    ( ) No, quit this operation in order to complete full system backup

  4. Move the cursor to Yes and then press ENTER to continue with the installation.
  5. Press the DOWN ARROW key until the cursor highlights the following entry on the second page of the software packages screen in the Applications Software Group:

    6. [ ] upgset -- Intuity Upgrade Utility
     

    Note: You might need to scroll through several screens.

  6. Press ENTER.

    7. The system displays the following line:

    [X] upgset -- Intuity Upgrade Utility

  7. Press the DOWN ARROW key until the cursor highlights the following message:

    8. Install selected packages
     

    Note: You then scroll through several screens.

  8. Press ENTER.

    9. The system displays the following message: 

    You selected the following packages from the CD:

    *upgset -- Est. Installation Time: 5 minutes


    Total Estimated Installation time is 0 hours and 5 minutes.

  9. Make sure that the cursor is on PROCEED and then press ENTER.

    10. The system installs the package and then displays the following message:

    Do you have more media from which to install more software?

  10. Enter n

    11. The system displays the following message:

    Do you have hardware to install?

  11. Enter n

    12. The system displays the System Management menu.

  12. Press F6 (Cancel) twice to log off the system.


    13.  

    Note: The system does not display the System Upgrade menu option on the Avaya Intuity Main Menu until you log back in to the system again.

  13. Log in to the Avaya Intuity system as craft
  14. Check the Avaya Intuity Main Menu for the System Upgrade menu option.
  15. Remove the Intuity AUDIX R5 software CD-ROM from the CD-ROM drive.
Avaya Communication
http://www.avaya.com
Avaya UCS Information Development
TOC Index Search