Installing and Configuring DS Ports

Some Control Units are equipped with DS ports. These can also be added to a system by installing a DS Expansion Module.

DS ports are used to support Avaya 2400, 3810, 4400, 5400 and 6400 Series telephones. Further details on the use of these phones are given in the User Guide for each phone.

Note: 4400/6400 Ringing Tones
The 4400 and 6400 telephones store ringer cadences internally and so cannot be altered by settings within Manager.

The following are instructions for installing a DS Expansion Module to any IP Office Control Unit.

  1. Using the blue expansion cable supplied, connect the DS Module to the Control Unit via the next available Expansion port.

  2. Power up the DS Module via the power supply provided.

  3. Reboot the Control Unit, the Control Unit will not see the DS module until after a reboot.

  4. Via IP Office Manager, receive the configuration from the Control Unit.

  5. From the Configuration Tree within Manager, click Unit to ensure that the DS module is now listed. Check that the additional Extensions and Users are listed. These can be renumbered and renamed as per normal extensions.

  6. Connect the DS handsets to the extension ports required.

 

More: