Previous page Next page

Software Requirements

The following software is required for 4600 Series IP Telephones to work properly.

CAUTION: A DHCP server is not mandatory, but static addressing is necessary when a DHCP server is unavailable. Due to the difficulties associated with static addressing, it is very strongly recommended that a DHCP server be installed and that static addressing be avoided.

CAUTION: A TFTP server does not need to be available for the Avaya IP Telephones to operate. The Avaya IP Telephones obtain important information from the script files on the TFTP server and depend on the TFTP file for software upgrades. If the TFTP server is not available when the Avaya IP Telephones reset, they will register with the media server and operate. Some features may not be available, and restoring those features will require resetting the Avaya IP Telephone(s) when the TFTP server is available.

CAUTION: 4630 IP Telephone Release 1.72 introduced significant software architecture changes. Thus, unlike most 4600 Series IP Telephones software releases, 4630 IP Telephone Release 1.72 and later cannot be downgraded to a release earlier than 1.72. Attempting to do so will render the 4630 (and 4630SW if Release 1.8 or greater) set inoperable. In addition, if you are upgrading a 4630 from a release prior to Release 1.61, you must first upgrade to Release 1.61, and then upgrade to the newer Release. You cannot upgrade directly from a pre-1.61 Release to a post-1.61 Release for the 4630.

Ensure that all required parameters are configured correctly. For Avaya media server information, see your administration documentation. For the DHCP and TFTP servers, see Server Administration.


Previous page Next page