Avaya TFTP (Suite Pro)

Configuration

Use the following procedure to configure the Avaya TFTP server:

1. Run the TFTP Suite Pro Server by selecting:
   Start-->Programs-->Avaya TFTP Server-->TFTPServer32.

The TFTP server starts.

CAUTION: You must restart Avaya TFTP manually whenever you reboot your TFTP server machine.

2. Select System-->Setup.
3. Enter the following values:

On the Outbound tab page: 1.
The Outbound path is the TFTP file path as recorded in Table 2:  Required Network Information Before Installation - Per DHCP Server.

Check the Enable Path options.
Under the Options tab page: turn on the No Incoming option. Under the Client Limits tab page: Drag the slide bar all the way to the right to set the Maximum Simultaneous Clients to infinite.

4. Place the 46xxupgrade.scr file in the file path directory. The filename “46xxupgrade.scr” is an example only. Use the filename obtained from the material downloaded from the Avaya Support Web site. See Contents of the Upgrade Script.