Group Identifier

Use the following procedure to set or change the Group Identifier.

NOTE: Perform this procedure only if the LAN Administrator instructs you to do so.

The 4601 IP Telephone does not support the Group Identifier.

1. While the telephone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 4 7 6 8 7 (Mute G R O U P)

NOTE: Press the Mute button momentarily. Do not press this button while pressing other keys/buttons. The 4630/4630SW IP Telephones and the 4690 IP Conference Telephone do not have a dedicated Hold button. For all other 4600 Series IP Telephones, pressing the Hold button instead of the Mute button also works.

The following text displays left-justified at the top of the display:

where ddd is the Group value.

2. Enter a valid Group value (0-999).

If a value different from the current Group value is entered, the following text displays left-justified at the top of the display:

3. Press the * button to terminate the procedure, or the # button to save the new value.

If you press the # button, the following text displays:

The new value is saved and the user interface is restored to its previous state.