Changing TBCT card parameters

Prerequisites

Before changing TBCT card parameters, check the following:

• TBCT card parameters have been assigned to a telephony card

Procedure

To change TBCT card parameters:

1. From web administration, go to the Two B Channel Transfer screen (Configuration Management > Switch Interfaces > Digital Interfaces > Two B Channel Transfer).
2. Select Change Two B Channel Transfer.

   The system displays the Change Two B Channel Transfer screen.

3. Select the card for which you want to change parameters.
4. Select Submit.

   The system displays the Change TBCT Parameters screen for the specified card.

5. In the Two B Channel Transfer on Trunk 1 ? field, select yes or no.
6. In the Two B Channel Transfer on Trunk 2 ? field, select yes or no.
7. In the Two B Channel Transfer on Trunk 3 ? field, select yes or no.

   Note:
   This field displays only if the system has a quad port telephony card.

8. In the Two B Channel Transfer on Trunk 4 ? field, select yes or no.

   Note:
   This field displays only if the system has a quad port telephony card.

9. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system.

© 2004 Avaya Inc. All Rights Reserved.