|
|
|
|
|
Use this screen to configure the ISDN-PRI T1 protocol for the card.
Field descriptions
Field |
Description |
Frame Type |
The frame format. Values: D4, ESF. |
Line Code |
The replacement for strings of consecutive zeros in data transmission using pulse code modulation (PCM). Values: AMI, AMI_ZCS, B8ZS. |
Idle Code |
The code used in digital communications that represents an absence of data. Values: 11111111, 01010100, 01010101. |
Length |
The length of the cable in feet between the telephony board and the telephone network. Values: 0-655. This value is an integer. It should only be changed if the length is more than 200 feet or if there are transmission problems. |
Clock Trunk |
The trunk that the board uses for its internal clock reference. Values: 1, 2 (for dual port cards); 1, 2, 3, 4 (for quad port cards). |
Clock Source |
The origin of the board's clock reference. Values: NETWORK, OSCILLATOR NETWORK refers to the clock extracted from the trunk, OSCILLATOR refers to the board's oscillator. |
Clock Mode |
The control of the board's clock. Values: STANDALONE. The board controls its own clock. |
Clock Fallback Trunk |
The trunk that the system uses to set its internal clock if the timing source on the Clock Trunk stops working. Values: none, 1, 2 (for dual port cards); none, 1, 2, 3, 4 (for quad port cards). |
Fax Enabled? |
The availability of fax with the protocol. Values: yes, no. |
ISDN Type |
The supplier of ISDN service. Values: 4ESS, 5ESS, Nortel, National, NTT INS-1500. |
D Channel on Trunk 1 |
The availability of a data channel on Trunk 1. Values: yes. |
D Channel on Trunk 2 |
The availability of a data channel on Trunk 2. Values: yes, no. |
D Channel on Trunk 3 |
The availability of a data channel on Trunk 3 (quad port cards only). Values: yes, no. |
D Channel on Trunk 4 |
The availability of a data channel on Trunk 4 (quad port cards only). Values: yes, no. |
Country and Region |
The country or region in which the Avaya IR system is located. Values: Japan, United States. |
Button descriptions
Button |
Description |
Submit |
Assigns the card to the protocol and prompts the user to stop and restart the voice system |
Reset |
Sets fields to their default values |
Cancel |
Displays the Assign Card screen |
Administration procedures
