Assigning a TTS type

To assign a TTS type:

1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
2. Select Text-to-Speech Configuration.

   The system displays the Text-to-Speech Configuration screen. For information about this screen, see Text-to-Speech Configuration screen.

3. If a Text-to-Speech type has not been previously assigned, select Assign New Text-to-Speech Type, or
   
   If a Text-to-Speech type has been previously assigned, in the Text-to-Speech Type field, select Assign New.
4. In the Text-to-Speech Type field, select the TTS type that you want to assign.
5. In the Engine field, select either sapi, speechify, or realspeak.

   Note:
   The value that you select for the Engine field must be consistent with the engine that is running on the TTS engine server.

6. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system.

© 2004 Avaya Inc. All Rights Reserved.