Changing a speech or DPR server

To change a speech or DPR server:

1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
2. Select Speech Recognition and DPR Configuration.

   The system displays the Speech Recognition and DPR Configuration screen. For information about this screen, see Speech Recognition and DPR Configuration screen.

3. In the Recognition Type field, select the recognition type for which you want to change the speech server.
4. Select Change.

   The system displays the Change Speech Recognition Server screen. For information about this screen, see Change Speech Recognition Server screen

5. In the Server Name field, type the name of the speech or DPR proxy server.
6. In the IP Address field, type the IP address of the speech or DPR proxy server.
7. In the Ports field, type the number of ports that are available on the speech or DPR proxy server.
8. In the Base Port field, do one of the following:
   • Type 4901 for a speech proxy server with a SpeechWorks OSR 1.1.4 speech recognition engine
   • Type 4904 for a speech proxy server with a SpeechWorks OSR 2.0.4 speech recognition engine
   • Type 7500 for a speech proxy server with a DPR engine
   • Type a port number greater than 1024 for a speech proxy server with a Nuance speech recognition engine

     Note:
     For a Nuance speech recognition engine, the value for the Base Port field should be consistent with the RecClientPort defined in the Nuance npc batch file.

9. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system.

© 2004 Avaya Inc. All Rights Reserved.