|
|
|
|
|
The display channel command displays channel information.
Synopsis
disp[lay] channel option [option]
disp chan option [option]
Description
The display channel command is used to list information at the channel level. The display channel command options are described in the following table:
Option |
Description |
all |
Displays information on all channels |
broken |
Displays all channels in the broken state |
foos |
Displays all channels assigned to facility service |
hwoos |
Displays all channels assigned to hardware service |
inserv |
Displays all channels that are in service |
irapi |
Displays all channels owned by IRAPI |
manoos |
Displays all channels in the manual out-of-service state |
mtc |
Displays all channels being used by the maintenance process |
netoos |
Displays all channels assigned to network service |
nonex |
Displays all channels in the nonexistent state |
nms |
Displays all NMS (digital telephony) channels |
number |
Displays information about the channel specified by channel number. A range of channels may be specified in the form m-n. |
service service_name |
Displays channels assigned with a specific service |
telephone tel_number |
Displays channels with telephone numbers assigned |
voip |
Displays all VoIP channels |
If more than one option is used, the system displays only channels that satisfy all the options given. If an invalid combination of options is given, the system displays an error message.
Examples
The following example displays information for channel 1.
disp channel 1
The following example displays information on all channels.
disp channel all
