Enabling fax for a digital protocol

Enabling fax involves administering a telephony card to recognize fax as being associated with a particular digital protocol.

To enable fax on a telephony card that has already been administered:

1. From web administration, go to the Digital Interfaces Protocols screen (Configuration Management > Switch Interfaces > Digital Interfaces > Digital Interfaces Protocols).
2. Select Change Parameters.

   The system displays the Change Card - Digital Interfaces screen.

3. Choose the protocol you are using.

   The system displays a Change Parameters screen for the specified protocol.

4. Select a Card.
5. Select Submit.

   The system displays a Change Card screen for the card.

6. In the Fax Enabled? field, select yes.
7. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system).

© 2006 Avaya Inc. All Rights Reserved.