|
|
|
|
|
Use this screen to stop the voice system by taking all system channels out of service with the option to wait for in-progress calls to end. You usually stop the voice system when you are performing some type of routine service such as backup or restore. When the system is stopped, the CPU does the following:
From this screen you can program a period of time for the system to wait before stopping the voice system.
The system waits the time you specified for calls to end and stops the voice system. If there is no call in progress, the voice system stops immediately.
After the wait period, stopping the voice system takes approximately 2 to 3 minutes to complete.
Field description
Field |
Description |
Wait Time in Seconds |
The number of seconds for the system to wait before stopping the voice system. Values: Any integer 60-600. |
Button descriptions
Button |
Description |
Submit |
Waits for the time specified then stops the voice system |
Reset |
Sets the field to its default value |
Administration procedures
