Field

Description

Frame Type

The frame format.

Values: D4, ESF.

Line Code

The replacement for strings of consecutive zeros in data transmission using pulse code modulation (PCM).

Values: AMI, AMI_ZCS, B8ZS.

Idle Code

The code used in digital communications that represents an absence of data.

Values: 11111111, 01010100, 01010101.

Length

The length of the cable in feet between the telephony board and the telephone network.

Values: 0-655.

This value is an integer. It should only be changed if the length is more than 200 feet or if there are transmission problems.

Clock Trunk

The trunk that the board uses for its internal clock reference.

Values: 1, 2 (for dual port cards); 1, 2, 3, 4 (for quad port cards).

Clock Source

The origin of the board's clock reference.

Values: NETWORK, OSCILLATOR.

NETWORK refers to the clock extracted from the trunk, OSCILLATOR refers to the board's oscillator.

Clock Mode

The control of the board's clock.

Values: STANDALONE.

The board controls its own clock.

Clock Fallback Trunk

The trunk that the system uses to set its internal clock if the timing source on the Clock Trunk stops working.

Values: none, 1, 2 (for dual port cards); none, 1, 2, 3, 4 (for quad port cards).

Fax Enabled?

The availability of fax with the protocol.

Values: yes, no.

ISDN Type

The supplier of ISDN service.

Values: 5ESS, 4ESS, Nortel, National, NTT INS-1500, QSIG.

D Channel on Trunk 1

The availability of a data channel on Trunk 1.

Values: yes.

D Channel on Trunk 2

The availability of a data channel on Trunk 2.

Values: yes, no.

D Channel on Trunk 3

The availability of a data channel on Trunk 3 (quad port cards only).

Values: yes, no.

D Channel on Trunk 4

The availability of a data channel on Trunk 4 (quad port cards only).

Values: yes, no.

Country

The country in which the Avaya IR system is located.

Values: Japan, United States.

Enabled Channels

The number of channels that have been enabled.

Values: 0-128

PRI Side

The side from which you want the PRI protocol to function. Set it to user if you want your Avaya DEFINITY or MultiVantage system to behave as the network. Set it to network if you want your Avaya DEFINITY or MultiVantage system to behave as the user.

Values: USER, NETWORK

Button

Description

Submit

Assigns the card to the protocol and prompts the user to stop and restart the voice system

Reset

Sets fields to their default values

Cancel

Displays the Change parameters screen

Help

Displays the system help files