Configuring H.323 terminal connections for VoIP

To configure H.323 terminal (station) connections on DEFINITY or MultiVantage, use the IP Networking Administration Station form. This topic provides information on key entries. See the "IP Networking Administration" section in the DEFINITY® Enterprise Communications Server Release 10 Administration for Network Connectivity, 555-233-504, for a detailed example procedure that describes how to configure an H.323 station.

The Avaya IR system configuration for Voice over IP must match the DEFINITY or MultiVantage H.323 station configuration and vice-versa.

The following limits apply to the MultiVantage H.323 station configuration for an Avaya IR system:

• One H.323 station may be assigned to each Avaya IR VoIP channel.
• Each VoIP channel must have a phone number that maps to one of the H.323 stations on the DEFINITY or MultiVantage.
• Each Avaya IR system must be a node in a network region that uses an IP codec set that contains either the G.711 mu-law or the A-law codec.

© 2005 Avaya Inc. All Rights Reserved.