|
|
|
|
|
The assign card command assigns a group number to a card.
The assign channel command assigns a group number to a channel.
Synopsis
assign card card#.[port#] to [eqpgrp] group_list
assign channel chan_list to [eqpgrp] group_list
Description
Use the assign card/channel command when a system is installed, the number of channels or cards changes, applications are added or deleted, telephone numbers change, or when you want to reconfigure the system. The system uses the card and channel assignments to route an incoming call to an equipment group.
Parameters for the assign card/channel command are:
Parameter |
Description |
card#.[port#] |
Specifies the card/channel number (a single card/channel number from a range of 0-255, a range of card/channel numbers in the form m-n, or all , for all card/channel numbers). |
chan_list |
A comma-separated or space-separated list of channel numbers, or a range of channel numbers in the form chan1-chan2. |
eqpgrp |
The equipment group number when assigning to an equipment group. |
group_list |
A comma-separated or space-separated list of equipment group numbers, or a range of equipment group numbers in the form group1-group2. |
Note:
If you refer to a nonexistent channel or nonexistent group in this command, the command fails.
Example
The following example shows a command that assigns channels 0 through 47 to equipment group 1.
assign chan 0-47 to eqpgrp 1
See also
