| |
Ring Timing Options |
|
Abbreviated Ring Options |
|
Personalized Ringing Options |
|
Distinctive Ringing |
Ringing options cannot be programmed on a QCC. The Call buttons are fixed to Immediate Ring. A QCC receives only two types of distinctive ringing--one ring for an inside call and two rings for an outside call.
Other Multiline TelephonesPersonalized ringing is not supported on MDW 9000 and 9010 telephones, but is supported on MDW 9030 and 9031 telephones.
Ring Timing Options can be programmed for a Multi-Function Module (MFM) only through centralized telephone programming.
If you set the ringer volume to low (about one-third of the maximum level) on an ETR or MLS telephone, you may not hear abbreviated ringing. Adjust the volume level as needed.
4400, 4400D, and Single-Line TelephonesNeither abbreviated ringing nor personalized ringing can be programmed for 4400, 4400D, or single-line telephones.
Ring Timing options for 4400, 4400D, and single-line telephones can be programmed only through centralized telephone programming.
Single-line telephones connected to a 008 OPT module do not receive distinctive ringing for the various call types listed in See Distinctive Ringing.
| Topics | |||||||||
| |
Description | ||||||||
|
|||||||||
| |
At a Glance | ||||||||
| |
Considerations & Constraints | ||||||||
|
Telephone Differences | ||||||||
|
Feature Interactions | ||||||||