Uniform Dial Plan Features

At a Glance

Users Affected

All

Reports Affected

Non-Local Dial Plan, Extension Information

Modes

Hybrid/PBX

Telephones

All

System Programming

Assign extension number ranges for non-local dial plan extensions:

  • SysRenumberNonLocal UDPDial no. of first extension in rangeEnterDial no. of last extension in rangeEnterDial no. of dial digits in extension rangeEnter Dial no. of pattern for extension rangeEnterExitExitExit

Delete extension number ranges for non-local dial plan extensions:

  • SysRenumberNonLocal UDPDial no. of first extension in rangeEnterDelRangeExitExit

Specify UDP routes:

  • TablesUDP RoutingDial pattern no.EnterDial route no.EnterPoolDial pool dial-out codeEnterExitExitExitExit

Specify FRLs for UDP routes:

  • TablesUDP RoutingDial pattern no.EnterDial route no.EnterFRLDial restriction levelEnterExitExitExitExit

Specify how many dialed digits should be absorbed (not sent over the trunk) by the system when a UDP call to a non-local extension is made on an identified UDP route:

  • TablesUDP RoutingDial pattern no.EnterDial route no.Enter
    AbsorbPress DropDial number of absorption digitsEnterExitExit
    ExitExit

Specify other (extra) digits that must be added by the system to the beginning of the dialed digits when calls are placed on an identified UDP route:

  • TablesUDP RoutingDial pattern no.EnterDial route no.EnterDigitsPress DropDial digits to addEnterExitExitExitExit

Specify voice, data, or both for an identified UDP route (use for routes with pools of PRI or T1 facilities):

  • TablesUDP RoutingDial pattern no.EnterDial route no.EnterDataSelect capabilityEnterExitExitExitExit

When SMDR is set to record both incoming and outgoing calls, specify how private networked trunk calls should be recorded:

  • LinesTrunks or MoreUDPSMDRDial line/trunk no.EnterSelect logging option

Maximums

  UDP Routing Patterns

  UDP Routes

  UDP FRL

  UDP Digit Absorption

  UDP Added Digits

  Number of digits in
  non-local dial plan
  extension number range

 

20 (range 1-20)

4 (range 1-4)

6 (range 0-6)

11 (range 0-11)

20 (any digits 0-9)

4 (2- and 3-digit numbers also supported)

Factory Settings  
  Display Preference Calling number
  Switch Identifier No value; facility not networked
  UDP FRL 3
  UDP Absorbed Digits 0
  UDP Added Digits 0


  • This topic only summarizes information about private networks. Detailed information is included in the Network Reference.

  • MERLIN LEGEND, DEFINITY ECS, DEFINITY BCS, or DEFINITY ProLogix Solutions features and operations are beyond the scope of this guide. This book discusses the network from the MERLIN MAGIX Integrated Systems' perspective.

  • When a network consists of more than two systems, a coordinating System Manager should act as a coordinator for all changes to private-network systems' dial plans, non-local dial plans, ARS routing, UDP routing, and Remote Access. Otherwise, the two System Managers should plan together and agree upon any changes that are made subsequently.

Topics
  Description
  Intersystem Calling
 
  Extension Ranges
Call Handling for Non-Local Dial Plan Extensions
  At a Glance
  Considerations & Constraints
  Telephone Differences
Feature Interactions