The following table lists the procedures for adding a new AMIS
Analog remote machine to the Message Networking system. The procedures appear
in the sequence in which they are performed.
| Completed |
Task |
| |
Obtain the completed planning worksheet for the remote machine.
You will use the information from this worksheet when you configure
the remote machine parameters for the new AMIS machine. |
| |
Obtain the Dial Plan Mapping requirements for the remote machine
from your account representative. You will use these requirements
to determine how to map the new system's dial plan. |
| |
Administer the remote machine
parameters for the new AMIS remote machine. |
| |
Administer the AMIS timing
parameters, if necessary, for the new remote machine. |
| |
Administer the Dial Plan Mapping
for the remote machine, using the Dial Plan Mapping requirements
you obtained. |
| |
Administer subscribers.
For AMIS remote machines, the following methods of adding subscribers
from the remote machine to the Message Networking system are
supported (listed in order of preference):
- Initiate Bulk Add by File from the Message Networking
system.
- Use self-registration to add subscribers' voiced names.
- Send a message from the new subscriber.
- Register through Subscriber Administration page on the
Message Networking system.
- Perform a Bulk Add by Range.
|
| |
Verify that the remote machine has been added to the Message
Networking system:
|
| |
Administer Message Networking
as a remote machine on the AMIS remote machine.
|
| |
Perform an analog remote machine
connectivity test. |
| |
Update existing remote machines in the Message Networking network for
subscribers on the new AMIS system. The Adding
and updating subscribers overview provides information on
how subscribers are updated for the different types of remote
machines. |
