|
The Message Networking system requires a dedicated circuit
with a dedicated circuit breaker. The power cord connects from the
rear of the system to the AC power inlet receptacle. See Back
view of platform. Before you open the PC, you must remove power
from the system.
To remove power:
- Shut down the system.
- Turn off the monitor's power button.
Verify that the monitor's power is off.
- Turn off the power by pressing the power button on the front
of the chassis. See Front view of platform.
The green power lamp on the front of the unit should be off.
- Unplug the power cord from the AC receptacle in the wall.
- If necessary, unplug the monitor cord from the PC.
Top of page
|
