|
Use the Network Port Utilization Traffic report to view
information on port usage on the Message Networking system.
This page contains the following fields.
Report Type: Select the type of report you want
to generate. Select Daily (the default) or Hourly. If you select
Hourly, the Hour field displays on the page.
Date: Type the date for which you want to generate the
report in mm/dd/yy format (for example, 10/30/02) The default is the current date.
Hour: Select the hour for which you want to generate
the report. This field appears only if you select Hourly in the Report Type field.
Connection Type: Select the connection (port)
type for which you want to generate the report:
- ALL (all types listed)
- TCP/IP — I (INTUITY)
- TCP/IP — A (Aria)
- TCP/IP — S (Serenade)
- SMTP
- ANALOG
Click Display to generate the report. The following table
lists the fields that are included in the report.
| Field |
Description |
| DATE |
The date (mm/dd) specified in the selection criteria screen.
|
| END TIME |
The time (hh:hh) at which data collection for this report
ended, using a 24-hour clock. |
| Busy Hour |
The hour (hh), using a 24-hour clock, at which the digital
networking ports were the busiest. The Busy Hour is based
on:
- The Busy Hour lines display the hour in which each protocol
was busiest, based on the seconds of usage across all ports
for all protocols. The Busy Hour (Seconds) line displays
the seconds of usage across all ports for that hour.
- The Maximum Simultaneous Ports lines display the hour
for each protocol that contained the max simultaneous connections.
The Total Seconds of Usage line displays the number of connections
for that hour. This field is displayed only if Daily is
selected as the Report Type and at least one port experienced
traffic during the day.
This field is not displayed if "Hourly" is selected
as the Report Type. If an individual protocol is selected,
the Busy Hour (Seconds) field is not included.
|
| Maximum Simultaneous Ports |
The number of networking ports that were active simultaneously
during the period displayed on the report. |
| NETWORK Port |
The port number of the remote machine. |
| Connection Type |
The type of networking administered for this port. |
| Usage (Seconds) |
|
|
The number of seconds this port was active for incoming calls.
|
|
|
The number of seconds this port was active for outgoing calls.
|
|
|
The total number of seconds this port was active for incoming
and outgoing calls. |
| Number of Sessions |
|
|
The number of sessions this port handled for incoming calls.
|
|
|
The number of sessions this port handled for outgoing calls.
|
|
|
The total number of sessions this port handled for incoming
and outgoing calls. |
| TOTAL |
The total for incoming, outgoing, and total fields under
the Usage (Seconds) and Number of Sessions headings. |
Note: If a message that is transmitted spans two hours (that
is, it begins transmission at the end of one hour and finishes at
the start of the next), that time is not reflected in the Hourly
report. For example, if a message is sent at 1:59:50 and finishes
at 2:00:10, that time is not included in the hourly report for 1
A.M. or 2 P.M. because there is not a start and end transmit recorded
in any one hour. However, that time is reflected if you run a Daily
report.
The following buttons appear at the bottom of the page:
- Back: Click this button to return to the Network Traffic
Reports page.
- Return to Main: Click this button to return to the Administration
menu.
- Display: Click this button to display the report results.
- Help: Click this button to get information about completing
this page.
- Print: Click this button to print the contents of the
Port Utilization report to a file (/iclog/icftp/reports/pr_inteport).
When you are prompted whether you want to overwrite any previous
version of the report, click OK.
Top of page
|
