|
This topic provides information about running
a Load Daily or Hourly Traffic Report:
Running a Load Daily Traffic Report
The Load Daily Traffic Report shows daily load traffic information
for 1 to 32 days. Traffic load refers to the number of calls handled
by each active port during the reporting period.
To run a Load Daily Traffic Report:
- On the Messaging Measurements page, type the password associated with you administration account (login) and press Enter (
 ).
-
At the enter command: prompt, type either:
- list measurements load day
- list measurements load day mm/dd/yy
where mm/dd/yy is the starting date up to 31 days previous
to the current date that you want as a starting point for the
report.
The system displays Load Daily Traffic screen. See
the Field definitions: Load Daily
Traffic report for a description of the fields that appear
on this screen.
- Press F1 (Cancel) to return the cursor to the enter command
prompt.
Running a Load Hourly Traffic Report
The Load Hourly Traffic Report shows hourly load traffic information
for up to 192 hours (8 days). Traffic load is the number of calls
handled by each active port during the reporting period.
To run a Load Hourly Traffic Report:
- On the Messaging Measurements page, type the password associated with you administration account (login) and press Enter ( ).
- At the enter command prompt, type either:
- list measurements load hour
- list measurements load hour mm/dd/yy
- list measurements load hour mm/dd/yy hh
where mm/dd/yy is the starting date up to seven days
previous to the current date and hh is the starting
24-hour time up to 191 hours previous to the current hour
that you want as a starting point for the report.
The date specification precedes an hour specification. If
you do not enter a date, the current hour of the current date
is used. If you do not enter an hour, the report starts with
the first hour of the date specified.
The system displays the Load Hourly Traffic screen. See
the Field definitions: Load Hourly
Traffic report for a description of the fields that appear
on this screen.
- Press F1 (Cancel) to return the cursor to the enter command
prompt.
Top of page
|
