VMSC - MAS - PBX Integration - MWI Settings Dialog Box

You can use the MWI Settings dialog box to configure message waiting indicator (MWI) settings.

Launching the Screen

To reach this dialog box, click the MWI Settings... button on the Inband tab of the PBX Integration dialog box (see VMSC - MAS - PBX Integration - Inband Tab).

Configuring the Screen Controls

Port Group Name Select the port group to be used for MWI. The Default Group is selected by default.

Port groups are created in the Port Groups dialog box. For more information, see MAS - Rules for Creating Port Groups.

Max MWI Sessions Enter the maximum number of MWI sessions allowed at one time. The maximum number cannot exceed the maximum number of ports in the selected port group.

Indicator On/Off signals must use the same port Select if your PBX has port affinity. This check box is cleared by default.

Indicator On:

Prefix Enter the DTMFs, if any, that the MAS must dial before the subscriber’s extension to turn on the message waiting indicator.

Suffix Enter the DTMFs, if any, that the MAS must dial after the subscriber’s extension to turn on the message waiting indicator.

Indicator Off:

Prefix Enter the DTMFs, if any, that the MAS must dial before the subscriber’s extension to turn off the message waiting indicator.

Suffix Enter the DTMFs, if any, that the MAS must dial after the subscriber’s extension to turn off the message waiting indicator.