VMSC - MAS - Telephony Interface Dialog Box (QSIG)

Modular Messaging Help

Getting Started

Installation

Administration

Maintenance

Reference

Home > MAS Administration > VMSC - MAS - Telephony Interface Dialog Box (QSIG)

VMSC - MAS - Telephony Interface Dialog Box (QSIG)

Note: For a detailed overview of Messaging Application Server (MAS) configuration in the Voice Mail System Configuration (VMSC) application, see Overview of MAS Configuration in VMSC.

This topic describes how to use the Telephony Interface dialog box to configure ports, if you are using Q-Signaling (QSIG) integration.

You can set the playback volume and configure the number of ports that connect the MAS with the Private Branch Exchange (PBX). You can enable specific ports.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain.

Click Message Application Servers.

Click on the MAS you want to configure.

Double-click the Telephony Interface.

The system displays the Telephony Interface dialog box for the selected MAS with the General tab selected. This is the only tab.

Note: If the QSIG telephony interface is not already active, click the down arrow and click Make Active.

Configuring the Screen Controls

Note: To configure this dialog box, you must be a member of a security role assigned the Telephony - Administer task. If you are a member of a role assigned the Telephony - View task, you have read-only access to this dialog box. See VMSC - VMD - Security Roles Dialog Box.

Playback Volume Enter a value for the playback volume. The range is -8 (minus 8) through 8, and the default is 2. Avaya recommends the default.

Maximum Concurrent Calls Enter the number of ports that connect the MAS to the PBX. The default is set during installation.

Configure the port fields listed in the grid:

Enable or disable ports, as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.

Port The port number is read only.

Top of page