Configuring the telephony interface for IP H.323

To configure telephony ports for IP H.323, use the Telephony Interface dialog box.

To configure IP H.323 telephony interface properties:

In the Voice Mail System Configuration window, click Message Application Servers.

Click the MAS you want to configure.

Double-click Telephony Interface.

Tip: To make the IP H.323 telephony interface active, click the down arrow and click Make Active. If the IP H.323 telephony interface is already active, this field does not appear.

The system displays the Telephony Interface dialog box, with the General tab active.

To configure ports for IP H.323, configure the following fields:

Playback Volume Enter a value for the playback volume. The range is – 8 through 8, and the default is 2.

Maximum Concurrent Calls Enter the maximum number of ports that connect the MAS to the PBX. This is the maximum number of concurrent calls that the MAS can support. The default is set during installation. The range is from 0 to 999.

Note: The AUDIX TUI supports only up to 20 ports for IP H.323 telephony.

Port Enable or disable ports as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.

To activate the new settings, you must restart the MAS.

Note: You can restart the MAS at this point, or you can continue with configuring PBX integration and then restart the MAS.

Top of page