- Playback Volume Enter a value for the playback volume. The range is – 8 through 8. We recommend that you enter 2 for 30-port, 24-port, 8-port, or 4-port cards. For Controlled LAN (C-LAN) and Inband integrations, the default value is 2.
- Number of Ports Enter the number of ports that connect the MAS with the PBX. The default is set during installation. The range is 0 through 999.
If you increase the number of ports, you must restart the MAS before you can administer them.
|
Note:
The AUDIX TUI supports only up to 24 ports for analog telephony.
|
|
- Configure the port fields.
- Enable or disable ports as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.
|
Tip:
You can also enable/disable a port using the Port Monitor application. Any changes made there are reflected in the Voice Mail System Configuration application and vice versa.
|
- Extension Enter the port extension number. You can enter up to 10 digits. This field is blank by default.
- Incoming Ring Count Enter a number to specify the number of rings before a call on the port is answered. The range is 1 through 9, and the default is 1.
- Primary Id Enter the first part of the PBX integration identifier, known as the logical terminal number (LTN), for serial integration only. You can enter up to 10 characters and digits (including & * # and ,). This field is blank by default.
|
Note:
This field is applicable to DMI-4 and RS-232 integrations only. Leave this field blank for C-LAN and inband integrations.
|
|
- Secondary Id Enter the second part of the PBX integration identifier, known as the message desk number (MD), for serial integration only. You can enter up to 10 characters and digits (including & * # and ,). This field is blank by default.
|
Note:
This field is applicable to DMI-4 and RS-232 integrations only. Leave this field blank for C-LAN and inband integrations.
|
|
