Configuring QSIG and set emulation properties

To configure a port group for MWI, use the QSIG/SE tab.

To display the QSIG/SE tab:

In the Voice Mail System Configuration window, click Message Application Servers.

Click the MAS you want to configure.

You may need to expand the tree to see the all the MASs in the voice mail domain.

Double-click PBX Integration for that MAS.

The system displays the PBX Integration dialog box, with the General tab active.

Select one of the following Integration Types:

Set Emulation for digital set emulation (DSE) integration

QSIG for Q.signaling (QSIG) integration

Click the QSIG/SE tab.

To configure QSIG and set emulation properties, configure the following fields:

Port Group Name Select the port group to be used for MWI. The Default port group is selected by default. Port groups are defined in the Port Usage tab. For more information, see Configuring port groups.

Max MWI Sessions Enter the maximum number of MWI sessions allowed at one time. The maximum number cannot exceed the maximum number of ports in the selected port group.

Indicator On/Off signals must use the same port Select this if your PBX has port affinity. This check box is cleared by default.

Note: Do not select this check box for Avaya switches supporting QSIG integration.

MWI On Enter the dial string required to switch on a subscriber’s MWI light. You can enter up to 50 characters. The default is ^O,%s,^O for NT M-1, and *4%s for G3. The system substitutes %s with the subscriber’s extension number. This field is not available with QSIG integrations.

MWI Off Enter the dial string required to switch off a subscriber’s MWI light. You can enter up to 50 characters. The default is ^F,%s,^F for NT M-1, and #4%s for G3. The system substitutes %s with the subscriber’s extension number. This field is not available with QSIG integrations.

After making these settings, you must stop and restart the MAS service for the settings to take effect.

Top of page