Configuring usage properties for port groups

In the Voice Mail System Configuration window, click Message Application Servers.

Note: You may need to expand the tree to see the MAS you want.

Click the MAS you want to configure.

Double-click Port Groups.

The system displays the Port Groups dialog box, with the General tab active.

Click the Usage tab.

PC Clients:

Number of Instances Enter the number of ports that can be accessed simultaneously by PC clients. This is limited to the number of ports configured for the port group. The range is 0 through the maximum number of ports available in the system, and the default is the maximum number of ports.

Port Group Select the port group to be used by the PC client applications. The default is Default Group.

Telephone User Interface: Port Group Select the port group to be used by the TUI. The default is Default Group.

Call Me: Port Group Select the port group to be used for Call Me. Ports in this group must also be in the Telephone User Interface port group. The default is Default Group.

FAX: Port Group Select the port group to be used for outgoing Fax calls. The default is Default Group.

Note: You only need to set up port groups for fax if you want to dedicate specific ports for faxing. For normal fax functionality, you can use the Default Group.

Configuring usage properties for port groups

To display the Port Groups dialog box, Usage tab:

To configure port usage properties, complete the following fields: