Made Easy Tool for DEFINITY Media Server Configurations
Issue 5, October 2002

Installing the Stratum 3 Clock

---

Connect Stratum 3 Clock DC Power

Return to Task List

1. Set the clock cabinet circuit breaker at the DC power plant OFF.


2. At the clock cabinet, connect a 6 AWG (#40) (16 mm 2) ground wire to the -48V terminal on the terminal strip.


3. At the clock cabinet, connect a 6 AWG (#40) (16 mm 2) wire to the -48VRTN terminal on the terminal strip.


4. Route the wires out of the cabinet and to the DC power plant.


5. At the DC power plant, connect the -48V wire to the DC OUTPUT circuit breaker.


6. At the DC power plant, connect the -48VRTN wire to the DISCH GRD bar.

Return to Task List

---

Copyright� 2002 Avaya Inc.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.