DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

Made Easy Tool for DEFINITY Media Server Configurations
Issue 5, October 2002



Bring the System Online

DEFINITY AUDIX System Power Procedures

Manually Power Down AUDIX System

A yellow caution sticker on the system's power unit notifies technicians to shut down the DEFINITY AUDIX System prior to powering down the system.

  1. Using a pointed object such as a paper clip or pen (do not use a pencil), press the Boot/Shutdown button. The button is located at the top right portion of the front panel.

  2. Hold the Boot/Shutdown button in until the LCD display flashes the message MSHUT.

  3. Release the Boot/Shutdown button.


Note: The DEFINITY AUDIX System takes about five minutes to shut down. The "heartbeat" indication on the display continues to flash.

Manually Power Up AUDIX System

  1. Using a pointed object such as a paper clip or a pen (do not use a pencil), press the Boot/Shutdown button.

  2. Hold the Boot/Shutdown button in until the display indicates the message, BTEST, steady on.

  3. Release the Boot/Shutdown button. The DEFINITY AUDIX System takes approximately five minutes to power up.


Note: Upon the system powering up, the DEFINITY AUDIX System automatically reboots. This sequence may show an MD or MJ ADX alarm in the display until the system has powered up. When the system has completed its power up sequence, the DEFINITY AUDIX System display reads: ADX.

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2002 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.