Made Easy Tool for DEFINITY Media Server Configurations
Issue 4, May 2002
Install Additional Hardware
Deliver License File (Add DCS)
- Type save translation and press Enter.
- Type reset system 3 and press Enter.
- If the system has IP endpoints registered, unplug the Ethernet cable from the TN799 (C-LAN) circuit pack.
- Type set time and press Enter.
After the translations have been copied (about 10 minutes), the system returns an error code, which must be a zero; otherwise, the translations are not copied.
Wait until the system has completely reset before continuing.
This disconnects (unregisters) all IP endpoints.
Direct connection between the switch and RFA
- Go to the RFA website, and, following the instructions in the "Deliver to G3r/G3si/G3csi" chapter of the RFA Job Aid, deliver the License File.