DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

Made Easy Tool for DEFINITY Media Server Configurations
Issue 4, May 2002



Bring the System Online

Test Data Module Hardware Connections

Return to Task List

Find your data module in the table below and follow the instructions for testing and troubleshooting it.

.

Type of
Data Module
How to Test and Troubleshoot

8400B+

The red LED should be steady on. If the red and green LEDs are blinking, the unit is not communicating with the Avaya Media Gateway. Check the wiring at the MDF, wall jack, and the 8400B+.

7400B+

The Power and TR LEDs should be steady on. If the Power and Data LEDs are blinking, the unit is not communicating with the Avaya Media Gateway. Check the wiring at the MDF, wall jack, and the 7400B+.

7400A

Set the 7400A to DCE mode. The Power LED must be steady on. The DTR, DSR, DCD, RTS, and CTS settings must be highlighted in the display. If the Power LED is blinking, the data module is not communicating with the Avaya Media Gateway. Check the wiring at the MDF, wall jack, and 7400A.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2002 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.