DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

Made Easy Tool for DEFINITY Media Server Configurations
Issue 4, May 2002



G3iV4 to Avaya MultiVantage

Save announcements (TN750 or TN750B only) [G3V4 to Avaya MultiVantage si]

Return to Task List


Note: You do not need to save announcements for configurations containing the TN750C or TN2501AP integrated announcement circuit packs, which contain on-board, nonvolatile memory.

Use this procedure for configurations containing the TN750 or TN750B announcement circuit pack. Saving announcements takes about 40 minutes.

  1. To determine whether the sytem has recorded announcements, type display announcements and press Enter.

    2. If no recorded announcements are listed, you do not have to save announcements.


Note: If the customer can verify that no announcements have been changed since the announcements were last saved, you do not have to save announcements. (But if there is any doubt, save announcements!)

  1. Type save announcements <port network> <carrier> <slot> and press Enter.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2002 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.