Disable/Enable Debug Mode

Use the following procedure to turn the debug mode for the button module serial port on or off.

CAUTION: A DEBUG setting of “On” disables any SBM24 Button Module connected to the module interface or any adapter plugged into Slot 2.

1. When you select DEBUG from the Craft Local Procedure Screen, the following text displays:

where, except for the 9610 for which this procedure is not applicable, the setting is the text string associated with the current system value of NVDEBUG, defined as:

• "On" if the NVDEBUG system value is "1".
• "Off" if the NVDEBUG system value is "0".
2. Press Change to toggle the selected setting from On to Off or vice versa.
3. Press Save to store the new setting.

If the value changed from "On" to "Off", the telephone initiates a reset. If the value changed from "Off" to "On" the Craft Local Procedure screen redisplays.

The telephone saves the new value.