Disable/Enable Event Logging

Use the following procedure to enable or disable logging of system events.

1. When you select LOG from the Craft Local Procedure Screen, the telephone prompts you to use the Right and Left navigation arrows to select a setting and displays the following text:

where, except for the 9610 which displays the actual value, the text string is the wording associated with the current system value of NVLOGSTAT, defined as:

• "Disabled" when NVLOGSTAT = 0
• "Emergencies" when NVLOGSTAT = 1
• "Alerts" when NVLOGSTAT = 2
• "Critical" when NVLOGSTAT = 3
• "Errors" when NVLOGSTAT = 4
• "Warnings" when NVLOGSTAT = 5
• "Notices" when NVLOGSTAT = 6
• "Information" when NVLOGSTAT = 7
• "Debug" when NVLOGSTAT = 8
2. To change the setting, press the Right (or Left) navigation arrow to cycle through the settings.

Depending on the current value, the next sequential text string is selected and displayed as the setting. For example, if the current value is Alerts (2), pressing the Right navigation arrow changes the value to Critical (3). If the current value is Debug (8), pressing the Right navigation arrow changes the value to Disabled (0).

3. Press Save to store the new setting and redisplay the Craft Local Procedure screen.