Self-Test Procedure

NOTE: 9600 Series IP Telephones store two software code images in reprogrammable non-volatile memory. The primary image, called the “big app” must be running to perform a self-test. The backup image, called the “little app” does not support the self-test.

For self-testing, use the following procedure:

1. When you select TEST from the Craft Local Procedure Screen, the telephone displays the following text:

2. Press Cancel to return to the Craft Local Procedure screen without testing the telephone. Press Test to start telephone testing.

The test performs the following actions:

• All softkeys are unlabeled.
• Groups of no more than 13 LEDs at a time on the telephone and any attached button modules illuminate sequentially for about a half second. Illumination starts with the upper half of the telephone and continues through the lower half of any attached button module in a repeating cycle.
• Pixels on the display are shown at their highest intensity.

After approximately 5 seconds, the top Application line displays either "Self-test passed" or "Self-test failed."

3. Press Back to return to the Craft Local Procedure screen.