Restart the Telephone

Use the following procedure to restart the telephone.

1. For all telephones except the 9610, invoke RESTART by pressing the Mute button. For 9610 IP Telephones, invoke RESTART by displaying the Contacts application and pressing the Contacts button.

NOTE: If the Contacts application is not displayed when restarting a 9610, press the Contacts button twice and proceed to the next step.

2. Enter the local (Craft) dialpad procedure password (0 to 7 numeric digits), then press the
   # button.

NOTE: A 6-second timeout is in effect between button presses. If you do not press a valid button within 6 seconds of pressing the previous button, the collected digits are discarded. In this case, no administrative option is invoked.

The entry is compared to the PROCPSWD value. If they match, the telephone displays the Craft Local Procedure screen and prompts “Select procedure and press Start.”

3. Use the navigation arrows to scroll to and highlight RESTART PHONE, then press Start or OK. Or scroll to RESTART PHONE and press the corresponding line button.
4. When you select RESTART PHONE from the Craft Local Procedure Screen, the telephone displays the following text:

5. Press Cancel to return to the Craft Local Procedure screen without restarting the telephone. Press Restart to proceed with the registration steps covered in the Dynamic Addressing Process.

A restart does not affect user-specified data and settings like Contacts data or the telephone login and password.

The remainder of the restart procedure depends on the status of the boot and application files: