Creating a Multinet Interface

To create a multinet interface:

1. In the navigation pane, expand the Routing > IP > Configuration folders, and then click Interfaces. The IP Interfaces Web page is displayed in the content pane. See Figure�12-2.
2. Select CREATE. The Add IP Interface Web page is displayed. See Figure�12-3.
3. Enter a name for the interface in the Interface field.
4. Select a VLAN for this multinet interface from the VLAN field pull-down menu.
5. Enter the network address associated with this interface in the Network Address field.
6. Select CREATE from the bottom of the Add IP Address Web page.

The IP Interfaces Web page is redisplayed and displays the new interface name listed in the Interface field.

7. Repeat steps 2 through 6 for any other interfaces that you want to associate with the same VLAN.

*Note: You must have a different network address for each new multinetting interface that you create for the same VLAN.

*Note: The first IP interface that has the BootP/DHCP Relay Gateway enabled will be the relay.