|
|
|
You can change the communications settings for the serial port connection located on the front panel of the layer 3 supervisor module from the Web Agent. The switch's console port is initially configured as a TTY Console to support a TTY connection. The layer 2 and layer 3 supervisor modules allow you to reconfigure the console serial port as a PPP Console to support a dial-in PPP connection using a modem.
Note: If you reconfigure the serial port as a PPP console, you can only change the switch's baud rate and flow control parameters. The flow control parameters are limited to None or Xon/Xoff.
This section contains procedures for the following tasks:
|
|
|