Web Agent Procedure

After you have set up a VLAN, you must create the IP interface that your VLAN and your subnet will use to communicate. While creating the IP interface, you must assign it to the VLAN. The last step is to enable IP forwarding (Routing) global parameters.

To enable OSPF on the IP interface:

1. Administratively bring down the IP interface. Select the down arrow from the Admin. State field and select DOWN.

Note: You must bring the IP interface Down to successfully enable OSPF on the IP interface. If you do not, you will get an error message and OSPF will not be enabled.

2. Select the down arrow from the OSPF field.
3. Select Enable.
4. Administratively bring the IP interface UP.