Displaying the QoS Settings for a Physical Port

Displaying the QoS Settings for a Physical Port

CLI Command

Use the show port command to display the QoS settings for a physical port. This command displays the priority of the port, if the port is set to ignore 802.1p tag priority, and if the port is set to use the DSCP for bridged IP traffic.

The syntax of the command is:

> show port [{<mod-num> | <mod-swport-range>} [...,{<mod-num> | <mod-swport-range>}]]

Table�192:�show port Command Parameters
Parameter	Description
<mod-num>	The slot number of a module. If you specify <mod-num>, the switch displays the QoS settings for all ports on the module in the slot that you specify.
<mod-swport-range>	The slot number of a module, and, either a port number, or a range of port numbers having the format Px-Py. For example: To specify port 1 on the module in slot 3, enter 3/1. To specify ports 1 through 5 on the module in slot 3, enter 3/1-5. If you specify <mod-swport-range>, the switch displays the QoS settings for the port or range of ports on the module in the slot that you specify.