Displaying the Policing Settings

Displaying the Policing Settings

Use the show port police command to display the settings for policing. For information on how policing works, see "Ingress Policing" earlier in this chapter.

The syntax for this command is:

> show port police {<mod-num> | <mod-swport-range>} [..., {<mod-num> | <mod-swport-range>}]

Table�198:�show port police Command Parameters
Parameter	Description
<mod-num>	The slot number of a module. If you specify <mod-num>, the switch displays the policing settings for all ports on the module in the slot that you specify.
<mod-swport-range>	The slot number of a module, and, either a port number, or a range of port numbers having the format Px-Py. For example: To specify port 1 on the module in slot 3, enter 3/1. To specify ports 1 through 5 on the module in slot 3, enter 3/1-5. If you specify <mod-swport-range>, the switch displays the policing settings for the port or range of ports on the module in the slot that you specify.