Use the show port queue service command to display the settings for queue servicing. The syntax for this command is:
> show port queue service {<mod-num> | <mod-swport-range>} [..., {<mod-num> | <mod-swport-range>}]
Table�204:�show port queue service Command Parameters �
Parameter
Description
<mod-num>
The slot number of a module. If you specify <mod-num>, the switch displays queue-service settings for all ports on the module in the slot that you specify.
<mod-swport-range>
The slot number of a module, and, either a port number, or a range of port numbers having the format Px-Py. For example:
To specify port 1 on the module in slot 3, enter 3/1.
To specify ports 1 through 5 on the module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the switch displays the queue-service settings for the port or range of ports that you specify.
