Enabling IEDR for Hunt Groups

This procedure globally enables IEDR for all ports in all hunt groups on the switch.

NOTE: All ports that are enabled for IEDR are subjected to the hunt group IEDR setting if they are placed in a hunt group whether they are administratively disabled or enabled. Ports that are enabled for IEDR before being placed in a hunt group will still display when showing configuration but they still will be subjected to take on the hunt group setting until they are removed from the hunt group.

To globally enable IEDR for all ports in hunt groups:

1. Enter Global Configuration mode.

The CLI displays the (configure)# prompt.

2. Enter the following command:

set huntgroup internal-error-shutdown enable

To globally disable IEDR for all ports in hunt groups, enter:

set huntgroup internal-error-shutdown disable