Table 23. Equipment List: Media Modules �
| Media Modules |
| Avaya MM710 T1/E1 Media Module |
| The MM710 T1/E1 Media Module will offer the combined features of an existing DEFINITY DS1 circuit pack and will include the following: *A built-in CSU *AMI-BASIC
*Both A-law for E1 and m -law for T1
*Line Coding: AMI, ZCS, B8ZS for T1 and HDB3 or AMI for E1
*Stratum 3 Clock compatibility
*Trunk signaling for supporting US and International CO trunks and tie trunks as currently in existence The MM710 T1/E1 Media Module supports the universal DS1 conforming to 1.544 Mbps T1 standard and 2.048 Mbps E1 standard ISDN PRI is also supported for T1 or E1 revenue-associated option |
| Material Code: 170900 |
Apparatus Code: DMM5 |
Optional |
| ComCode (for Services Ordering Only): 108919978 |
| DEF DS1 LOOPBACK JACK 700A |
| Provides the ability to remotely troubleshoot the MM 710 T1/E1 Media Module. It is required for any customer with a maintenance contract and highly recommended for any other customer. |
| Material Code: 107988867 |
Apparatus Code: None |
Required for any customer with a maintenance contract and an MM710 T1/E1 Media Module, highly recommend for other customers to avoid expensive technician visits. |
|
|
| MM711 Analog Media Module |
| The MM711 Analog Media Module supports eight analog interfaces allowing the connectivity of Loop Start, Ground Start, Analog DID trunks, and 2-wire analog Outgoing CAMA E911 trunks. As well, the MM711 Analog Media Module allows connectivity of analog, tip/ring devices such as single line telephones, modems or group 3 fax machines. Each port may be configured as either a trunk interface or a station interface. Also included is support for caller ID signaling, ring voltage generation for a variety of international frequencies and cadences and administrable line termination styles. |
| Material Code: 170899 |
Apparatus Code: MM711 |
Optional |
| ComCode (for Services Ordering Only): 108919960 |
|
|
| MM712 DCP Media Module |
| The MM712 DCP Media Module allows connectivity of up to 8 two-wire DCP voice terminals. MM712 will not support 4-Wire DCP telephones. Signal timing specifications for the MM712 support TDM Bus Timing in receive and transmit modes. The G700 Media Gateway supplies only +5 VDC and -48 VDC to the MM712 Media Module. Any other required voltages must be derived on the module. Loop range secondary protection is provided on the MM712. The MM712 is also self-protecting from an over current condition on a tip and ring interface. |
| Material Code: 170898 |
Apparatus Code: MM712 |
Optional |
| ComCode (for Services Ordering Only): 108919952 |
|
|
| MM720 BRI Media Module |
| The MM720 BRI Media Module contains eight ports that interface to the central office at the ISDN T reference point. Information is communicated in two ways:
Over two 64 Kbps channels called B1 and B2 that can be circuit-switched simultaneously
Over a 16 Kbps channel called the D channel that is used for signaling. The D channel occupies one time slot for all eight D channels.
The circuit switched connections have a u-law or A-law option for voice operation. The circuit switched connections operate as 64 Kbps clear channels when in the data mode. The MM720 BRI Media Module does not support BRI stations, or combining both B channels together to form a 128 Kbps channel. |
| Material Code: |
Apparatus Code: MM720 |
Optional |
| ComCode (for Services Ordering Only): |
|
|
| MM760 VoIP Media Module |
| The MM760 VoIP Media Module is a clone of the motherboard VoIP engine. It provides an additional 64 VoIP channels with G.711 compression. Each chassis base system can support up to 64 G.711 single channel calls. If the desire is to have an essentially non-blocking system, an additional MM760 VoIP Media Module needs to be added if more than two MM710 T1/E1 Media Modules are used in a single chassis. This will provide for an additional 64 channels. This VoIP conversion resource in the G700 Media Gateway is an improved version of the Prowler board resource and from a configuration perspective, the two are the same. The capacity is 64 G.711 TDM/IP simultaneous calls, or 32 compression codec (G.729 or G.723) TDM/IP simultaneous calls. These call types can be mixed on the same resource, so we say that the simultaneous call capacity of the resource is 64 "G.711 Equivalent Calls".
|
| Material Code: 170901 |
Apparatus Code: MM760 |
Optional |
| ComCode (for Services Ordering Only): 108919986 |
|
|
|
|
|
|
|
