Table 49. TEST #36 Station Status and Translation Audits and Updates �
| Error Code |
Test Result |
Description/Recommendation |
|
|
ABORT |
Could not allocate the necessary system resources to run this test. Retry the command at 1-minute intervals for a maximum of 5 times. |
| 1004 |
ABORT |
The port received an EXT-DEV failure during the test. The test has been aborted. Enter test external-device-alarm port GGGVSpp to determine if the port is reporting an EXT-DEV failure before retesting. If the port has no EXT-DEV failure, retry the command at 1-minute intervals for a maximum of 5 times. |
| 1006 |
ABORT |
This port has been busied out by command. Check Error Log for Error Type 18 (port busied out). If present, release the port with the release port command and run the test again. |
| 2000 |
ABORT |
Response to the test request was not received within the allowable time period. |
| 2100 |
ABORT |
Could not allocate the necessary system resources to run this test. Retry the command at 1-minute intervals for a maximum of 5 times. |
| 1 |
FAIL |
This failure does not indicate a hardware problem. The switchhook audit failed, this condition may occur when the audit is performed at the same time that the terminal equipment goes off-hook. Enter test external-device-alarm port GGGVSpp to determine if the port is reporting an EXT-DEV failure before retesting. Wait until the port has no EXT-DEV failure before retesting If the port has no EXT-DEV failure, retry the command at 1-minute intervals for a maximum of 5 times. |
| 7 |
FAIL |
The translation update failed. This does not indicate a hardware problem but may be an internal software error. |
|
|
PASS |
The software and the port processor have the same status. |
