DID-TRK (Direct Inward Dial Trunk)

DID-TRK (Direct Inward Dial Trunk)

Table 12. DID-TRK (Direct Inward Dial Trunk)

MO Name (in Alarm Log)

Alarm Level

Initial Command to Run*

Full Name of MO

DID-TRK

MAJOR

test port GGGVSpp l

DID Trunk

DID-TRK

MINOR

test port GGGVSpp l

DID Trunk

DID-TRK

WARNING

None

DID Trunk

Note: You must consult local records for the location and designation of the equipment rack where the G700 is mounted.

A MAJOR alarm on a trunk indicates that alarms on these trunks are not downgraded by the set options command and that at least 75 percent of the trunks in this trunk group are alarmed.

Table 12. DID-TRK (Direct Inward Dial Trunk)
MO Name (in Alarm Log)	Alarm Level	Initial Command to Run*	Full Name of MO
DID-TRK	MAJOR**	test port GGGVSpp l	DID Trunk
DID-TRK	MINOR	test port GGGVSpp l	DID Trunk
DID-TRK	WARNING	None	DID Trunk
Note: You must consult local records for the location and designation of the equipment rack where the G700 is mounted.
A MAJOR alarm on a trunk indicates that alarms on these trunks are not downgraded by the set options** command and that at least 75 percent of the trunks in this trunk group are alarmed.

Many trunk problems are caused by incorrect settings of parameters on the trunk group administration form. Settings must be compatible with the local environment and with parameter settings on the far-end. Refer to Administrator's Guide for Avaya MultiVantage Software, 555-233-506, for information on how to administer trunks. The Application Notes section of that book shows the correct settings for administrable timers and other parameters on a country-by-country basis.

Direct Inward Dial trunks connect the switch to the CO, and allow outside parties to call directly to an extension in the system. MM711 supports eight incoming-only ports.