Test Integrated Announcement��

The TN750B/C and TN2501AP Announcement circuit packs provide the ability to store messages. The messages can be recorded from telephones on- or off-premises and have flexible message lengths. The telephone selected as the test telephone must have a class of service (COS) with console permission enabled.

Record Announcement��

1. Select a test telephone with console permissions enabled.
2. Dial the access code followed by the integrated announcement extension number.
3. When you hear a dial tone, press 1. When you hear a beep or stutter tone, speak the announcement into the telephone.
4. When done, press # if a digital phone or hang up if an analog phone to stop the recording. You then hear a dial tone.

Playback Announcement��

1. If using a digital phone, press 2 to hear the announcement. When the announcement is over, you hear a dial tone. If satisfied, hang up.
2. If using an analog phone, dial the integrated announcement extension number to hear the announcement. When the announcement is over, you hear a dial tone. If satisfied, hang up.

Delete Announcement��

1. Dial the access code followed by the integrated announcement extension number.
2. When you hear a dial tone, press 3 to delete the announcement and end the recording session. A confirmation tone is heard when the announcement is deleted.