Avaya 8102 Analog Telephone

The basic Avaya 8102 telephone and the Avaya 8102M telephone are single-line analog sets that require one tip and ring pair for operation. These telephones are exactly the same in appearance: each contains 12 programmable dialing buttons, automatic redial (with the REDIAL button), selected personalized ringing pattern, a Message light, a HOLD button, a Data jack, and an Adjunct jack. The Avaya 8102 and Avaya 8102M telephones also allow access to system features with the FLASH button and appropriate dial codes.

Physical Description

Dimensions

NOTE: The dimensions listed here for the Avaya 8102 and Avaya 8102M telephones are approximate.

• Width = 6-3/4 inches
• Depth (front to back) = 9-1/2 inches
• Height (maximum with handset in place) = 3-1/2 inches
• Thickness of housing = At the top of the telephone, the thickness measures
• 1-5/8 inches; at the bottom of the telephone, the thickness measures 1 inch.

Feature Buttons

Fixed Feature Buttons

The Avaya 8102 and Avaya 8102M telephones have the following fixed feature buttons:

• FLASH button: For using features such as Conference with business communications systems.
• REDIAL button: Can be used for redialing the last number dialed from the dial pad, either an extension or an outside number. The number redialed can be up to 20 digits. With the (Redial) Auto-Pause feature, the telephone can be programmed to insert pauses after a dial access code (such as 9) in a redialed number. If the user usually waits a short period to obtain a second dial tone after dialing an access code, this waiting time can be set by programming the automatic pause between the system access code and the telephone number. The (Redial) Auto-Pause feature will help eliminate misdialing.
• HOLD button: Used for putting a call on hold. If users want to put a call on hold and place another call, they must use the system Hold feature by using the FLASH button.
• Message Light: The red Message light flashes when a message is left for the user. It goes off when the user retrieves the message. The Message light also serves as a visual ringing indicator by flashing quickly while the telephone is ringing.
• Programmable Dialing Buttons: The Avaya 8102 and Avaya 8102M telephones provide 12 programmable dialing buttons on which the user can store frequently dialed telephone numbers or feature codes. To use these preprogrammed features, the user merely lifts the handset and then presses the appropriate programmable dialing button.
• PROGRAM and PAUSE buttons: Both of these buttons are used for storing numbers on the preprogrammed dialing buttons on the upper half of the faceplate of the telephone. The PAUSE button can be used to insert a one half second pause/delay into a telephone number stored on a programmable dialing button or into a dialing access code in the Auto-Pause feature of Redial.

Other Physical Features

Ringing

The Avaya 8102 and Avaya 8102M telephones have electronic tone ringing. The ringer volume control is a 3-position switch on the right side of the housing. The user can also use a Tone Selector (labeled "LO HI") for selecting one of two-tone ringer frequencies or a second Tone Selector (labeled "SLOW FAST") for selecting one of two-tone ringer modulation rates. Both Tone Selector switches are on the right side of the telephone.

Mounting Options

The Avaya 8102 and Avaya 8102M telephones come equipped with a non-adjustable desk stand which can be turned upside-down and used for wall mounting the telephone.

Jacks

The Avaya 8102 and Avaya 8102M telephones have a line jack on the back of the telephone for connecting a line cord, and a Handset cord jack for connecting the handset. These telephones also have a Data jack for connecting a device such as a modem to the telephone. The Avaya 8102 and Avaya 8102M telephones have an Adjunct (equipment) jack which allows the connection of a speakerphone to the telephone and an adjunct power jack for connecting an auxiliary power source for using the adjunct equipment.

Handset

The Avaya 8102 and Avaya 8102M telephones are equipped with a K-type handset.

Dial pad

The Avaya 8102 and Avaya 8102M telephones have a 12-button touch-tone dial pad. The letters "Q" and "Z" have been added to the appropriate dial pad keys for directory access, and the "5" button on your dial pad has raised bars for visually-impaired users.

Cords

Two cords are supplied with the Avaya 8102 and Avaya 8102M telephones: a coiled 9-foot modular handset cord and a 7-foot modular line cord.

Color Options

The Avaya 8102 and Avaya 8102M telephones are available in black and in white.

Power Requirements

The Avaya 8102 and Avaya 8102M telephones must have auxiliary power for adjunct equipment when such equipment is connected..

Power Failure Operation

The Avaya 8102 or Avaya 8102M telephone can be used as an emergency station during power failure transfer conditions.

Ringer Equivalency Numbers

The Ringer Equivalency Number for the Avaya 8102 telephone is: 0.5A and 1.6B. For the Avaya 8102M the Ringer Equivalency Number is: 1.5B and 0.8A.

Hearing Aid Compatible

These telephones are compatible with the inductively coupled hearing aids as required by the FCC.

Specialty Handsets

NOTE: The Avaya 8102M is compatible with Avaya K-style Specialty Handsets while the Avaya 8102 is not.