This screen is the last step required for completing the installation of a new software release. It sets up the server to reboot from the currently active (new) software version, instead of rebooting to the previous version.
You do not need to change the server status to standby to do this procedure.
Because the Install New Software wizard must be run on each server to upgrade it, you need to use this screen on each server after you complete a software installation. See Verification tests for details.
If you do not commit
the new software release (make it permanent), then the next time the server
reboots, it will come up running the previous version of software. Any
new translations you may have made to the new release will be lost, and
the new software will have to be installed again. It is a good idea to
commit the new software to operation as soon as you are satisfied that
it is working correctly.
To make a new software release the new permanent version:
In the main menu under Server Configuration and Upgrades, click the Make Server Upgrade Permanent link.
On the Make Server Upgrade Permanent screen, click Enter.
Results appear on the Make Server Upgrade Permanent results screen. Confirm that the operation was successful.
The system will now come up running the latest version of software even if the system reboots. It is safe to continue regular telephony administration.