Error Log Entries and Test to Clear Values

Table 176. Wideband Access Endpoint Maintenance Error Log Entries

Error Type	Aux Data	Associated Test	Alarm Level	On/Off Board	Test to Clear Value
0*	0	Any	Any	Any	test access-endpoint extension sh r 1
18(a)	0	busyout access-endpoint	WARNING	OFF	release access-endpoint extension
130(b)		None	WARNING	ON	test access-endpoint extension
1793(e)		None			test board GGGVSpp long
3840(f)	Any	Port Audit and Update (Test #36)
*Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate test description and follow the recommended procedures.

Notes:

• (a) The wideband access endpoint has been busied out by a busyout access-endpoint extension command. No calls can be made to this extension.
• (b) The Media Module has been removed or has been insane for more than 11-minutes. To clear the error, reinsert or replace the Media Module.
• (e) The Interface Media Module has failed. See MG-DS1.
• (f) The Port Audit and Update Test (#36) failed due to an internal system error. Enter status access-endpoint extension and verify the status of the port. If the wideband access endpoint port is out of service, enter release access-endpoint extension to put it back into service. Retry the test command.